Connection between 2 E-Terminals and FX2N PLC.
The required material for the setup is as follows
| Sr. no. | Material |
| 1 | PLC :FX Series |
| 2 | CPU :FX2N |
| 3 | HMI : E1101 ,E1071 |
| 4 | HMI S/W :E-Designer Ver: 7.31 |
Two E-Terminals are connected to FX-2N PLC using MISTU- CAB14A
and MISTU-CAB 6Aa
The required cables are as follows
| Sr. no. | Item | Description |
| 1 | MISTU-CAB 6Aa | Prog.Cable For E-Terminal And Comm. Cable between E1071 and E-1101 |
| 2 | MISTU-CAB 14A | Comm. Cable for E-Terminal to FX2N PLC |
E1101 Program Setting
STEP 1: Select Controller FX and FX Series Serial driver for Controller.
Snapshot of Controller 1 Setting in E1101
Put Controller 1 in COM 1 (RS422) Port in Peripheral Configuration as shown below.
E1071 Program Setting
STEP 1: Select FX-Series serial Controller in COM 2 (RS232) Port as shown below.
0 comments:
Post a Comment